Salon goge baki

Salon goge baki wani sabon salo ne na kayan adon da ya fito, wanda ake amfani da shi a cikin tufafi, kayan aikin gida, sana'a da sauran fannoni.

Yana cikin tsari na yau da kullun, a cikin masana'anta don ƙara wani tsayi na kayan haɗi (kamar EVA), bayan an gama yin kwalliyar, a yi amfani da kayan aiki don gyara zaren ɗin da ke kan EVA, cire kayan haɗi, yana yin kwalliya kamar haka. siffar buroshin hakori, wanda aka fi sani da embroidery.

Salon goge gogen haƙori da ƙwanƙwasa ƙwanƙwasa dabaru ne daban-daban guda biyu, zaren sakar goge goge goge ya tsaya kamar gashin buroshin haƙori.Ƙwaƙwalwar ƙwanƙwasa wani ɗaki ne da aka yi ta hanyar zare ulun flannel, kuma gashi yana ƙasa.

Bugu da kari, kwalliyar goge goge ta bambanta da tawul din.Tawul embroidery ne embroidery zaren tawul ɗin yadi a kan zane, sabõda haka, embroidery juna yana da Multi-layered, sabon abu, uku-girma ma'anar ƙarfi, da dai sauransu, kuma zai iya cimma lebur embroidery, tawul embroidery gauraye embroidery, ƙwarai inganta amfani sa. na'ura mai ɗorewa ta kwamfuta da faɗaɗa filin aikace-aikacenta, ana iya amfani da ita sosai a cikin tufafi, kayan haɗi na gida, aikin hannu da sauran masana'antu.

Hanyar samar da buroshin goge baki

Reverse Brush embroidery yana nufin tasirin jujjuya masana'anta da sarrafa shi bayan an yi masa ado a bayansa, zaren ɗin da aka saka a baya zai tashi da kyau, amma saboda yana jujjuya kayan kwalliyar, ba ya da amfani ga iri-iri. na hanyoyin ƙwanƙwasa gauraye da ƙwarya, yawanci ana amfani da su a lokacin aikin sabulun goge goge mai tsafta.Salon buroshin haƙori na gaba yana nufin tasirin yin ado a gaban masana'anta, saboda layin fuskar yana ƙulli tare da layin ƙasa, tasirin zaren sarrafa kayan aiki zai bayyana m fiye da na baya, amma ana iya haɗa shi da sauran kayan adon. hanyoyin kamar lebur ɗin lebur don sa ƙirar ta arzuta kuma ta bambanta.

Juya matakan samar da embodied:

1.A cewar girman girman ƙirar, yi amfani da tef ɗin buɗewa don tafiya wurin buɗe layin guda ɗaya akan ragar yashi.

2.Yanke ragamar yashi tare da firam ɗin waje na layi ɗaya, kuma manna manne mai gefe biyu tare da kewayen ramin yanke don manne mai girma uku.

3.A cewar girman girman masana'anta, ƙara da'irar tef mai gefe biyu don liƙa zane.

4.Sanya ragar yashi kafin a liƙa manne mai girma uku don hana zaren ƙirƙira faɗuwa cikin manne mai girma uku yayin yin ado.

5.Manna maɗauran nau'in nau'i uku a kan manne mai gefe guda biyu, kuma a lokaci guda, don sauƙaƙe kayan aiki, zaka iya ƙara takarda na kakin zuma a kan manne mai girma uku.

6.Stick masana'anta baya gefe sama a kan tef mai gefe biyu.

7. Sanya Layer na baƙin ƙarfe a kan yanki na kayan ado, sa'an nan kuma aiwatar da kayan ado.

8.A yi amfani da ƙarfe da sauran kayan aiki don sanya ƙarfen ya yi zafi sannan a tsoma a kan zaren ɗin don hana zaren ɗin kwancewa bayan an sarrafa shi, ko kuma a yi amfani da ƙarfe don hana zaren ɗin ya sassauta bayan an sarrafa shi.

9.The ironed embroidery kayayyakin suna reverse for sarrafa, kawai yanke wani Layer na yashi net a kan surface sa'an nan kuma dauke da uku-girma manne don samun da hakori embroidery sakamako, taro samar da shi ne mafi kyau a yi amfani da takardar fata inji don aiki. .

10.Sheet fata inji don aiki.

11.The peeling kauri daga cikin takardar fata inji za a iya gyara bisa ga bukatun, da saba peeling kewayon wadannan inji: 0.6 ~ 8mm.

Matakan samarwa na gaba:

1.Yi amfani da bel ɗin buɗewa don buɗe allura ɗaya akan ragar yashi.

2.Yanke ragar yashi tare da firam ɗin waje na layi ɗaya.

3. Aiwatar da tef mai gefe biyu tare da gefen buɗewa.

4.Ƙara goyon baya da ake bukata bisa ga halaye na kayan.

5.Bayan haɗa zane tare da gefen gaba na rigar, da farko zana sashin layi na lebur.

6.The lebur embroidery an kammala.

7. Saka manne mai girma uku (EVA manne).

8.Don hana stitches daga samun makale a cikin manne mai girma uku, ƙara Layer na yashi net a saman manne mai girma uku.

9.Sanya bangaren kayan kwalliyar goge baki.

10. Bangaren kwalliyar goge baki an kammala.

Domin hana zaren zaren sassautawa, ƙara manne baƙin ƙarfe a ƙasan saman samfurin.

Rigakafin yin ado da goge goge

1.Patterning yawanci yana amfani da hanyar tafiya ta allura guda ɗaya, ƙimar ya kamata a ƙaddara bisa ga kauri na zaren ƙira, gabaɗayan zaren zane-zane na 120D / 2 tare da dinki 0.6mm X density 0.6mm, 200D / 2 embroidery thread with stitch 1mm X density 1 mm.

2.Idan kayi amfani da zaren sama da 200D/2, yana da kyau a zabi allura 14 # ko fiye, yana da kyau a yi amfani da ƙugiya mai kauri, in ba haka ba yana da sauƙi a toshe zaren.

3.The tsawo na allura mashaya danna zane kafar na embodied hakori embroidery part ya kamata a gyara daidai.

4.The hardness na uku-girma manne (EVA manne) na iya zama daga 50 digiri zuwa 75 digiri, da kuma kauri za a iya ƙaddara bisa ga ainihin bukatun.